Samsung Galaxy TabS 10.5 T805MUBU1ANK2
SM-T805M 4 countries Android 4.4.2 (KitKat)

Samsung Galaxy TabS 10.5 T805MUBU1ANK2 Firmware

Samsung Galaxy TabS 10.5 T805MUBU1ANK2 is an Android 4.4.2 (KitKat) firmware for 4 countries, 5 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T805MUBU1ANI1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T805M is available: T805MUBS1CSB1.

Download firmware
8.7/10 (458)39,124 times
Android 4.4.2 (KitKat)
OS Version
2014-11-14
Build Date
4
Countries
5
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    ModelRegionCSC VersionMODEM/CP VersionRelease dateSizeFile nameDownload
    SM-T805M
    BVO Bolivia
    UPO Uruguay
    		T805MUUB1ANL1T805MUBU1ANK1 2015-01-13 1.856 GiB
    SM-T805M_1_20161025175653_2qq8iilyya_fac.zip
    SM-T805M
    PNT Peru
    		T805M1AOB1T805MUBU1ANK2 — — —
    SM-T805M
    PNT Peru
    		T805MPNT1AOB1T805MUBU1ANK1 — 1.543 GiB
    SM-T805M_1_20170202160852_wwas1m2yci_fac.zip
    SM-T805M
    PVT Peru
    		T805M1ANL1T805MUBU1ANK2 — — —
    SM-T805M
    PVT Peru
    		T805M1AOA1T805MUBU1ANK2 — — —
    SM-T805M
    PVT Peru
    		T805MPVT1ANL1T805MUBU1ANK1 2014-12-22 1.566 GiB
    SM-T805M_1_20151223192227_bgs2p9amcn_fac.zip
    SM-T805M
    ZTO Brazil
    		T805M1ANL1T805MUBU1ANK2 — — —
    SM-T805M
    ZTO Brazil
    		T805MZTO1ANL1T805MUBU1ANK1 2015-01-08 1.852 GiB
    SM-T805M_1_20190313105427_dwk157gfdm_fac.zip

    No matching downloads

    How to flash T805MUBU1ANK2

    • T805MUBU1ANK2 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of T805MUBU1ANK2 by region

    First release
    December 22, 2014
    Last region
    January 13, 2015
    Duration
    23 days
    Regions
    4
    1. Day 1 · · 1 region
      PeruPVT
    2. Day 18 · · 1 region
      BrazilZTO
    3. Day 23 · · 2 regions
      BoliviaBVOUruguayUPO

    Device specifications

    • Launched withAndroid
    • Display diagonal26.7 cm (10.5")
    • Display resolution2560 x 1600 pixels
    • Display technologySuper AMOLED
    • Rear camera resolution8 MP
    • Front camera resolution2.1 MP
    • Wi-Fi standardWi-Fi 5 (802.11ac)
    • Weight467 g

    Specifications of SM-T805, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    T805MUBU1ANK2 is Android 4.4.2 (KitKat) firmware for Samsung Galaxy TabS 10.5, released for 4 countries, 5 CSC codes. Samsung built it on 2014-11-14.

    No. A newer build for SM-T805M is available: T805MUBS1CSB1. Install it instead of T805MUBU1ANK2 unless you need this exact version. The previous build was T805MUBU1ANI1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy TabS 10.5 must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy TabS 10.5 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 24 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy TabS 10.5

    No changelog details available.
    Model firmware by region