Samsung Galaxy Tab S3 T825CZCU3CTD1

T825CZCU3CTD1: Samsung Galaxy Tab S3 SM-T825C firmware

Release date:

Samsung Galaxy Tab S3 T825CZCU3CTD1 is an Android 9 (Pie) firmware for China (CHC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T825CZHU3CTD1 https://samfirm.shop/build/T825CZHU3CTD1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T825C is available: T825CZHU3CTK1 https://samfirm.shop/build/T825CZHU3CTK1.

Package: China (CHC): CSC T825CCHC3CTD1, 2.50 GiB, built Apr 9, 2020.

All SM-T825C firmware https://samfirm.shop/model/SM-T825C

Download firmware
9.2 (453)4,545 times
Android 9 (Pie)
OS Version
2020-05-08
Release date
2020-03-01
Security patch
1
Countries
1
CSC codes
3
Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: T825CZCU3CTD1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-T825C
    CHC China
    T825CCHC3CTD1 2020-05-08 2.496 GiB
    SM-T825C_1_20200409162555_48duunubww_fac.zip
    File on Samsung server:SM-T825C_1_20200409162555_48duunubww_fac.zip.enc4
    Size: 2.50 GiB (2,680,398,704 B)
    CRC32 (Samsung FUS):EA9A5CF4
    Package contents:
    • BL_T825CZCU3CTD1_CL17010817_QB30268366_REV00_user_low_ship_MULTI_CERT.tar.md5
    • AP_T825CZCU3CTD1_CL17010817_QB30268366_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar.md5
    • CP_T825CZCU3CTD1_CP15550016_CL17010817_QB30268366_REV00_user_low_ship_MULTI_CERT.tar.md5
    • CSC_CHC_T825CCHC3CTD1_CL17010817_QB30268366_REV00_user_low_ship_MULTI_CERT.tar.md5
    • HOME_CSC_CHC_T825CCHC3CTD1_CL17010817_QB30268366_REV00_user_low_ship_MULTI_CERT.tar.md5
    Download

    No matching downloads

    How to flash T825CZCU3CTD1

    • T825CZCU3CTD1 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in T825CZCU3CTD1

    • Other bug fixes
    - The stability of Workspace has been improved.
    • The latest Android security patch has been applied.
    - Device security has been further enhanced.

    Device specifications

    • Launched withAndroid 7.0
    • Display diagonal24.6 cm (9.7")
    • Display resolution2048 x 1536 pixels
    • Display technologySuper AMOLED
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • Front camera resolution5 MP
    • Weight434 g

    Specifications of SM-T825, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    T825CZCU3CTD1 is Android 9 (Pie) firmware for Samsung Galaxy Tab S3, released for China (CHC). It includes the 2020-03-01 security patch. Samsung built it on 2020-04-09.

    No. A newer build for SM-T825C is available: T825CZHU3CTK1. Install it instead of T825CZCU3CTD1 unless you need this exact version. The previous build was T825CZHU3CTD1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.496 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab S3 must be on bootloader binary 3 or lower.

    This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy Tab S3 running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 3 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab S3

    The exact changes may differ depending on your device model, country/Region, and service provider.

    • Other bug fixes
    - Overall stability of functions improved.
    • The latest Android security patch has been applied.
    - Device security has been further enhanced.

    • Other bug fixes
    - The stability of Workspace has been improved.
    • The latest Android security patch has been applied.
    - Device security has been further enhanced.

    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    New firmware for other devices