Samsung Galaxy Tab S3 T825UBS3CTD1
SM-T825 9 countries Android 9 (Pie)

Samsung Galaxy Tab S3 T825UBS3CTD1 Firmware

Samsung Galaxy Tab S3 T825UBS3CTD1 is an Android 9 (Pie) firmware for 9 countries, 9 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T825XXU3CTD1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T825 is available: T825UBU3CUF1.

Download firmware
8.7/10 (484)43,637 times
Android 9 (Pie)
OS Version
2020-04-05
First release
other regions until 2020-04-25
9
Countries
9
CSC codes
3
Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    5
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-T825
    BVO Bolivia
    CHO Chile
    COO Colombia
    EON Trinidad & Tobago
    +2 more countries
    PEO Peru
    TPA Panama
    		T825UUB3CSH7T825UBS3CTC1 2020-04-25 2020-04-29 2.825 GiB
    SM-T825_1_20200425031128_b9purjug7e_fac.zip
    		Download
    SM-T825
    DOO Dominican Republic
    		T825UUB3CSH7T825UBS3CTC1 — — — — Download
    SM-T825
    MXO Mexico
    		T825UUB3CSH7T825UBS3CTC1 — — — — Download
    SM-T825
    ZTO Brazil
    		T825ZTO3CSH7T825UBS3CTC1 2020-04-18 2020-04-29 2.822 GiB
    SM-T825_1_20200418013029_hbfh2xn5q8_fac.zip
    		Download
    SM-T825
    ZTO Brazil
    		T8253CSH7T825UBS3CTD1 2020-04-05 — — — Download

    No matching downloads

    How to flash T825UBS3CTD1

    • T825UBS3CTD1 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of T825UBS3CTD1 by region

    Samsung released this build in all regions (7) on the same day, April 29, 2020.

    Device specifications

    • Launched withAndroid 7.0
    • Display diagonal24.6 cm (9.7")
    • Display resolution2048 x 1536 pixels
    • Display technologySuper AMOLED
    • Processor frequency2.15 GHz
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • Front camera resolution5 MP
    • Weight434 g

    Frequently Asked Questions

    T825UBS3CTD1 is Android 9 (Pie) firmware for Samsung Galaxy Tab S3, released for 9 countries, 9 CSC codes. Samsung built it on 2020-04-05.

    No. A newer build for SM-T825 is available: T825UBU3CUF1. Install it instead of T825UBS3CTD1 unless you need this exact version. The previous build was T825XXU3CTD1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab S3 must be on bootloader binary 3 or lower.

    This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy Tab S3 running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 23 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab S3

    No changelog details available.

    • The following functions have been added : Call , text on other devices, Flipboard Briefing
    • The security of your device has been improved.

    No changelog details available.
    Upgraded One UI for Android Pie 9.0

    One UI brings you Android Pie 9.0, with exciting new features and a whole new look and feel based on feedback from users in Samsung and Google.
    We recommend that you back up your important data to keep it safe before the upgrade.
    Some apps, including Calculator, Samsung Internet, Samsung Notes, and Samsung Members, need to be updated individually after you update your OS.
    To use the Remote unlock function in Find My Mobile on an Android Pie 9.0 device, the sc...

    No changelog details available.
    Model firmware by region