Samsung Galaxy A3 A300FXCS1BPG2
SM-A300F 6 countries Android 5.0.2 (KitKat)

Samsung Galaxy A3 A300FXCS1BPG2 Firmware

Samsung Galaxy A3 A300FXCS1BPG2 is an Android 5.0.2 (KitKat) firmware for 6 countries, 9 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A300FXXS1BPG2: Android updated from Android 5.0.2 (Lollipop) to Android 5.0.2 (KitKat). A newer build for SM-A300F is available: A300FXXS1BRI1.

Download firmware
9.2/10 (460)39,002 times
Android 5.0.2 (KitKat)
OS Version
2016-07-19
Build Date
6
Countries
9
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    9
    MODEM/CP Version: A300FXCS1BPG2
    ModelRegionCSC VersionSizeFile nameDownload
    SM-A300F
    AFR Kenya
    		A300FOJV1BOI1 — — Download
    SM-A300F
    MAT Morocco
    		A300FOJV1BOI1 — — Download
    SM-A300F
    MRU Mauritius
    		A300FOJV1BOI1 — — Download
    SM-A300F
    MTZ Zambia
    		A300FOJV1BOI1 — — Download
    SM-A300F
    MWD Morocco
    		A300FOJV1BOI1 — — Download
    SM-A300F
    XFA South Africa
    		A300FOJV1BOI1 — — Download
    SM-A300F
    XFE South Africa
    		A300FOJV1BOI1 — — Download
    SM-A300F
    XFM South Africa
    		A300FOJV1BOI1 — — Download
    SM-A300F
    XFU Angola
    		A300FOJV1BOI1 — — Download

    No matching downloads

    How to flash A300FXCS1BPG2

    • A300FXCS1BPG2 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 4.4
    • Display diagonal11.4 cm (4.5")
    • Display resolution540 x 960 pixels
    • Display typeSAMOLED
    • Processor frequency1.2 GHz
    • RAM1 GB
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • SIM cardsDual SIM
    • Battery capacity1900 mAh
    • Weight110 g

    Frequently Asked Questions

    A300FXCS1BPG2 is Android 5.0.2 (KitKat) firmware for Samsung Galaxy A3, released for 6 countries, 9 CSC codes. Samsung built it on 2016-07-19.

    No. A newer build for SM-A300F is available: A300FXXS1BRI1. Install it instead of A300FXCS1BPG2 unless you need this exact version. The previous build was A300FXXS1BPG2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A3 must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy A3 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 64 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A3

    · The security of your device has been improved.

    • The security of your device has been improved.

    No changelog details available.

    • Network connectivity enhancement.
    • The security of your device has been improved.

    No changelog details available.
    Model firmware by region