Samsung Galaxy J5 Prime G570FXXU1APIB
SM-G570F 13 countries Android 6.0.1 (Oreo)

Samsung Galaxy J5 Prime G570FXXU1APIB Firmware

Samsung Galaxy J5 Prime G570FXXU1APIB is an Android 6.0.1 (Oreo) firmware for 13 countries, 19 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G570FXXU1APIA, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G570F is available: G570FXXS4CTJA.

Download firmware
9.0/10 (462)82,840 times
Android 6.0.1 (Oreo)
OS Version
2016-09-27
Build Date
13
Countries
19
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy J5 Prime use bootloader binary 4 (latest: G570FXXS4CTJA). If your device already runs binary 4, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    19
    MODEM/CP Version: G570FXXU1APIB
    ModelRegionCSC VersionSizeFile nameDownload
    SM-G570F
    ACR Saudi Arabia
    		G570FOJV1APIB — — Download
    SM-G570F
    AFG Afghanistan
    		G570FOJV1APIB — — Download
    SM-G570F
    AFR Kenya
    		G570FOJV1APIB — — Download
    SM-G570F
    BTC Libya
    		G570FOJV1APIB — — Download
    SM-G570F
    DKR Kenya
    		G570FOJV1APIB — — Download
    SM-G570F
    EGY Egypt
    		G570FOJV1APIB — — Download
    SM-G570F
    KSA Saudi Arabia
    		G570FOJV1APIB — — Download
    SM-G570F
    LYS Libya
    		G570FOJV1APIB — — Download
    SM-G570F
    MID Iraq
    		G570FOJV1APIB — — Download
    SM-G570F
    MWD Morocco
    		G570FOJV1APIB — — Download
    SM-G570F
    PAK Pakistan
    		G570FOJV1APIB — — Download
    SM-G570F
    THR Iran
    		G570FOJV1APIB — — Download
    SM-G570F
    TMC Algeria
    		G570FOJV1APIB — — Download
    SM-G570F
    TUN Tunisia
    		G570FOJV1APIB — — Download
    SM-G570F
    WTL Saudi Arabia
    		G570FOJV1APIB — — Download
    SM-G570F
    XFA South Africa
    		G570FOJV1APIB — — Download
    SM-G570F
    XFE South Africa
    		G570FOJV1APIB — — Download
    SM-G570F
    XFV South Africa
    		G570FOJV1APIB — — Download
    SM-G570F
    XSG United Arab Emirates
    		G570FOJV1APIB — — Download

    No matching downloads

    How to flash G570FXXU1APIB

    • G570FXXU1APIB has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Display diagonal12.7 cm (5")
    • Display resolution1280 x 720 pixels
    • Display typeTFT
    • Processor frequency1.4 GHz
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • Battery capacity2400 mAh
    • Weight143 g

    Frequently Asked Questions

    G570FXXU1APIB is Android 6.0.1 (Oreo) firmware for Samsung Galaxy J5 Prime, released for 13 countries, 19 CSC codes. Samsung built it on 2016-09-27.

    No. A newer build for SM-G570F is available: G570FXXS4CTJA. Install it instead of G570FXXU1APIB unless you need this exact version. The previous build was G570FXXU1APIA.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J5 Prime must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy J5 Prime running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 63 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J5 Prime

    • The security of your device has been improved.

    No changelog details available.

    • The security of your device has been improved.

    · The security of your device has been improved.

    No changelog details available.
    Show 9 older builds

    · The security of your device has been improved.

    • The security of your device has been improved.

    No changelog details available.

    • The security of your device has been improved.

    No changelog details available.

    · The security of your device has been improved.

    · The security of your device has been improved.

    ※ If your device is encrypted, it must be decrypted before upgrading.

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    Model firmware by region