Samsung Galaxy J3(2017) J330FXXS3BRI2
SM-J330F 20 countries Android 8.0.0 (Oreo)

Samsung Galaxy J3(2017) J330FXXS3BRI2 Firmware

Samsung Galaxy J3(2017) J330FXXS3BRI2 is an Android 8.0.0 (Oreo) firmware for 20 countries, 21 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J330FXXU3BRH1: Android updated from Android 8.0.0 (Pie) to Android 8.0.0 (Oreo). A newer build for SM-J330F is available: J330FXXU4CZC2.

Download firmware
9.2/10 (459)91,756 times
Android 8.0.0 (Oreo)
OS Version
2018-09-07
Build Date
20
Countries
21
CSC codes
3
Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy J3(2017) use bootloader binary 4 (latest: J330FXXU4CZC2). If your device already runs binary 4, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    21
    MODEM/CP Version: J330FXXS3BRI2
    ModelRegionCSC VersionSizeFile nameDownload
    SM-J330F
    AUT Switzerland
    		J330F3BRG2 — — Download
    SM-J330F
    CAC Uzbekistan
    		J330FOXY3BRG2 — — Download
    SM-J330F
    DBT Germany
    		J330F3BRG2 — — Download
    SM-J330F
    ETL Czechia
    		J330FOXX3BRG2 — — Download
    SM-J330F
    EUR Greece
    		J330FOXX3BRG2 — — Download
    SM-J330F
    ITV Italy
    		J330F3BRG2 — — Download
    SM-J330F
    LUX Luxembourg
    		J330F3BRG2 — — Download
    SM-J330F
    NEE Nordic Europe
    		J330F3BRG2 — — Download
    SM-J330F
    ORX Slovakia
    		J330FOXX3BRG2 — — Download
    SM-J330F
    PHE Spain
    		J330F3BRG2 — — Download
    SM-J330F
    PHN Netherlands
    		J330F3BRG2 — — Download
    SM-J330F
    PRT Poland
    		J330F3BRG2 — — Download
    SM-J330F
    SEB Baltic Europe
    		J330FOXX3BRG2 — — Download
    SM-J330F
    SEE Serbia
    		J330FOXX3BRG2 — — Download
    SM-J330F
    SEK Ukraine
    		J330FOXY3BRG2 — — Download
    SM-J330F
    SIM Slovenia
    		J330F3BRG2 — — Download
    SM-J330F
    SKZ Kazakhstan
    		J330FOXY3BRG2 — — Download
    SM-J330F
    TEB Bosnia & Herzegovina
    		J330F3BRG2 — — Download
    SM-J330F
    TPH Portugal
    		J330FOXX3BRG2 — — Download
    SM-J330F
    XEH Hungary
    		J330FOXX3BRG2 — — Download
    SM-J330F
    XEO Poland
    		J330F3BRG2 — — Download

    No matching downloads

    How to flash J330FXXS3BRI2

    • J330FXXS3BRI2 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Display diagonal12.7 cm (5")
    • Display resolution1280 x 720 pixels
    • Display typeTFT
    • Processor frequency1.4 GHz
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • SIM cardsDual SIM
    • Battery capacity2400 mAh
    • Weight142 g

    Frequently Asked Questions

    J330FXXS3BRI2 is Android 8.0.0 (Oreo) firmware for Samsung Galaxy J3(2017), released for 20 countries, 21 CSC codes. Samsung built it on 2018-09-07.

    No. A newer build for SM-J330F is available: J330FXXU4CZC2. Install it instead of J330FXXS3BRI2 unless you need this exact version. The previous build was J330FXXU3BRH1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J3(2017) must be on bootloader binary 3 or lower.

    This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy J3(2017) running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 45 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J3(2017)

    No changelog details available.
    Model firmware by region