Samsung Galaxy J7 Neo J701MUBU9CTC1
SM-J701M 9 countries Android 9 (Pie)

Samsung Galaxy J7 Neo J701MUBU9CTC1 Firmware

Samsung Galaxy J7 Neo J701MUBU9CTC1 is an Android 9 (Pie) firmware for 9 countries, 14 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J701MUBS8CTA4: bootloader binary raised from 8 to 9, so after installing it there is no way back to older builds. A newer build for SM-J701M is available: J701MUBUBCZC2.

Download firmware
8.8/10 (483)60,697 times
Android 9 (Pie)
OS Version
2020-03-26
First release
other regions until 2020-04-02
9
Countries
14
CSC codes
9
Bootloader binary

Bootloader binary 9. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy J7 Neo use bootloader binary B (11) (latest: J701MUBUBCZC2). If your device already runs binary B (11), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    2
    MODEM/CP Version: J701MUBU9CTC1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-J701M
    ARO Argentina
    CHK, CHO, CHP, CHQ Chile
    COO Colombia
    DOO Dominican Republic
    +4 more countries
    EON, TTT Trinidad & Tobago
    MXO Mexico
    TPA Panama
    UPO, UYO Uruguay
    		J701MUUB9CTC1 2020-03-26 2020-06-05 2.27 GiB
    SM-J701M_1_20210603054509_5u99fxxlz1_fac.zip
    MD5:b51b2c54ed4d5206544bcb51ce52195e
    SHA1:0cdf6e87202d7fe4104e97513ada5b95c4f446f5
    		Download
    SM-J701M
    BVO Bolivia
    		J701MUUB9CTC1 2020-04-02 2020-05-25 2.291 GiB
    SM-J701M_1_20210806001248_8piq7tq7fp_fac.zip
    		Download

    No matching downloads

    How to flash J701MUBU9CTC1

    • J701MUBU9CTC1 has bootloader binary 9. Your device must run binary 9 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of J701MUBU9CTC1 by region

    First release
    May 25, 2020
    Last region
    June 5, 2020
    Duration
    12 days
    Regions
    14
    1. Day 1 · · 1 region
      BoliviaBVO
    2. Day 12 · · 13 regions
      ArgentinaAROChileCHKCHOCHPCHQColombiaCOODominican RepublicDOOMexicoMXOPanamaTPATrinidad & TobagoEONTTTUruguayUPOUYO

    Device specifications

    • Launched withAndroid 7.0
    • Display diagonal14 cm (5.5")
    • Display resolution720 x 1280 pixels
    • Display typeSAMOLED
    • Processor frequency1.6 GHz
    • Processor familySamsung Exynos
    • Processor model7870
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity3000 mAh
    • Weight170 g

    Frequently Asked Questions

    J701MUBU9CTC1 is Android 9 (Pie) firmware for Samsung Galaxy J7 Neo, released for 9 countries, 14 CSC codes. Samsung built it on 2020-03-26.

    No. A newer build for SM-J701M is available: J701MUBUBCZC2. Install it instead of J701MUBU9CTC1 unless you need this exact version. The previous build was J701MUBS8CTA4.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J7 Neo must be on bootloader binary 9 or lower.

    This build uses bootloader binary 9. It can be flashed on a Samsung Galaxy J7 Neo running binary 9 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 7 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J7 Neo

    No changelog details available.
    Model firmware by region