Samsung Galaxy J7 Pro J730GUBU8CSK1
SM-J730G 5 countries Android 9 (Pie)

Samsung Galaxy J7 Pro J730GUBU8CSK1 Firmware

Samsung Galaxy J7 Pro J730GUBU8CSK1 is an Android 9 (Pie) firmware for 5 countries, 5 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J730GUBS7CSI2: bootloader binary raised from 7 to 8, so after installing it there is no way back to older builds. A newer build for SM-J730G is available: J730GUBUDCUG1.

Download firmware
8.9/10 (477)30,396 times
Android 9 (Pie)
OS Version
2019-11-08
First release
other regions until 2019-11-22
5
Countries
5
CSC codes
8
Bootloader binary

Bootloader binary 8. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy J7 Pro use bootloader binary D (13) (latest: J730GUBUDCUG1). If your device already runs binary D (13), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: J730GUBU8CSK1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-J730G
    BVO Bolivia
    		J730GUUB8CSK1 2019-11-08 2019-12-10 1.912 GiB
    SM-J730G_1_20201218212204_mh37hcsxmb_fac.zip
    		Download
    SM-J730G
    COM Colombia
    		J730GCOM8CSK1 2019-11-22 2019-12-19 2.265 GiB
    SM-J730G_1_20210713061638_t3r9n0xrtc_fac.zip
    		Download
    SM-J730G
    COM Colombia
    		J730G8CSK1 2019-11-08 — — — Download
    SM-J730G
    ECO Ecuador
    		J730G8CSK1 2019-11-08 — — — Download
    SM-J730G
    EON Trinidad & Tobago
    		J730GUUB8CSK1 2019-11-22 2019-12-19 1.96 GiB
    SM-J730G_1_20210713063740_s8tgod6kej_fac.zip
    		Download
    SM-J730G
    ZTA Brazil
    		J730GZTA8CSK1 2019-11-22 2019-12-24 2.286 GiB
    SM-J730G_1_20210713055510_h9lrpg8e4s_fac.zip
    		Download
    SM-J730G
    ZTA Brazil
    		J730G8CSK1 2019-11-08 — — — Download

    No matching downloads

    How to flash J730GUBU8CSK1

    • J730GUBU8CSK1 has bootloader binary 8. Your device must run binary 8 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of J730GUBU8CSK1 by region

    First release
    December 10, 2019
    Last region
    December 24, 2019
    Duration
    15 days
    Regions
    4
    1. Day 1 · · 1 region
      BoliviaBVO
    2. Day 10 · · 2 regions
      ColombiaCOMTrinidad & TobagoEON
    3. Day 15 · · 1 region
      BrazilZTA

    Device specifications

    • Display diagonal14 cm (5.5")
    • Display resolution1920 x 1080 pixels
    • Display typeSAMOLED
    • Processor frequency1.6 GHz
    • RAM3 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • SIM cardsDual SIM
    • Battery capacity3600 mAh
    • Weight181 g

    Frequently Asked Questions

    J730GUBU8CSK1 is Android 9 (Pie) firmware for Samsung Galaxy J7 Pro, released for 5 countries, 5 CSC codes. Samsung built it on 2019-11-08.

    No. A newer build for SM-J730G is available: J730GUBUDCUG1. Install it instead of J730GUBU8CSK1 unless you need this exact version. The previous build was J730GUBS7CSI2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J7 Pro must be on bootloader binary 8 or lower.

    This build uses bootloader binary 8. It can be flashed on a Samsung Galaxy J7 Pro running binary 8 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 3 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J7 Pro

    No changelog details available.
    Model firmware by region