Samsung Galaxy Note4 N910CXXU2DQJ2
SM-N910C 5 countries Android 6.0.1 (Marshmallow)

Samsung Galaxy Note4 N910CXXU2DQJ2 Firmware

Samsung Galaxy Note4 N910CXXU2DQJ2 is an Android 6.0.1 (Marshmallow) firmware for 5 countries, 8 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build N910CXXU2DQJ1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-N910C is available: N910CXXU2DSC1.

Download firmware
9.4/10 (480)35,298 times
Android 6.0.1 (Marshmallow)
OS Version
2017-11-03
First release
other regions until 2017-12-27
5
Countries
8
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: N910CXXU1DQH1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-N910C
    CAM Cambodia
    THL Thailand
    XME Malaysia
    XXV Vietnam
    		N910COLB2DQJ2 2017-12-27 2017-11-03 2.173 GiB
    SM-N910C_1_20171103120753_hgudk5mqek_fac.zip
    		Download
    SM-N910C
    GLB Philippines
    		N910COLB2DQJ2 — — — — Download
    SM-N910C
    SMA Philippines
    		N910COLB2DQJ2 — — — — Download
    SM-N910C
    XTC Philippines
    		N910COLB2DQJ2 — — — — Download
    SM-N910C
    XTE Philippines
    		N910COLB2DQJ2 — — — — Download

    No matching downloads

    How to flash N910CXXU2DQJ2

    • N910CXXU2DQJ2 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of N910CXXU2DQJ2 by region

    First release
    November 3, 2017
    Last region
    December 27, 2017
    Duration
    55 days
    Regions
    4
    1. Day 1 · · 2 regions
      MalaysiaXMEThailandTHL
    2. Day 55 · · 2 regions
      CambodiaCAMVietnamXXV

    Device specifications

    • Display diagonal14.5 cm (5.7")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • Processor frequency1.9 GHz
    • RAM3 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity3220 mAh
    • Weight176 g

    Frequently Asked Questions

    N910CXXU2DQJ2 is Android 6.0.1 (Marshmallow) firmware for Samsung Galaxy Note4, released for 5 countries, 8 CSC codes. Samsung built it on 2017-11-03.

    No. A newer build for SM-N910C is available: N910CXXU2DSC1. Install it instead of N910CXXU2DQJ2 unless you need this exact version. The previous build was N910CXXU2DQJ1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.173 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Note4 must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy Note4 running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 154 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Note4

    No changelog details available.

    ·Battery usage optimisation
    ·Improved performance with efficient memory management
    ·Security Enhancements
    ·Improved the stability
    ·After updating, you will not be able to downgrade to the old software because of updates to the security policy.

    No changelog details available.
    Model firmware by region