Samsung Galaxy Note 10.1 2014 Edition P600XXSDRH5
SM-P600 7 countries Android 5.1.1 (Lollipop)

Samsung Galaxy Note 10.1 2014 Edition P600XXSDRH5 Firmware

Samsung Galaxy Note 10.1 2014 Edition P600XXSDRH5 is an Android 5.1.1 (Lollipop) firmware for 7 countries, 7 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build P600XXSDQC2: Android updated from Android 4.4.2 (KitKat) to Android 5.1.1 (Lollipop). A newer build for SM-P600 is available: P600UEUDQF1.

Download firmware
9.2/10 (458)30,919 times
Android 5.1.1 (Lollipop)
OS Version
2019-02-11
Build Date
7
Countries
7
CSC codes
S (28)
Bootloader binary

Bootloader binary S (28). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Note 10.1 2014 Edition use bootloader binary U (30) (latest: P600UEUDQF1). If your device already runs binary U (30), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: P600XXSDRH5
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-P600
    BGL Bulgaria
    		P600OXXDRI1 — — — — Download
    SM-P600
    PHE Spain
    		P600OXADRH1 2019-02-11 2019-02-11 1.389 GiB
    SM-P600_1_20190211120714_kj094pz2ex_fac.zip
    		Download
    SM-P600
    ROM Romania
    		P600OXXDRI1 — — — — Download
    SM-P600
    SEE Serbia
    		P600OXXDRI1 — — — — Download
    SM-P600
    SIO Slovenia
    		P600OXXDRI1 — — — — Download
    SM-P600
    TPH Portugal
    		P600OXXDRI1 — — — — Download
    SM-P600
    XSK Slovakia
    		P600OXXDRI1 — — — — Download

    No matching downloads

    How to flash P600XXSDRH5

    • P600XXSDRH5 has bootloader binary S (28). Your device must run binary S (28) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of P600XXSDRH5 by region

    Samsung released this build in all regions (1) on the same day, February 11, 2019.

    Device specifications

    • Launched withAndroid
    • Display diagonal25.6 cm (10.1")
    • Display resolution2560 x 1600 pixels
    • Processor frequency1.9 GHz
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Front camera resolution2 MP
    • Wi-Fi standardWi-Fi 5 (802.11ac)
    • Weight540 g

    Frequently Asked Questions

    P600XXSDRH5 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy Note 10.1 2014 Edition, released for 7 countries, 7 CSC codes. Samsung built it on 2019-02-11.

    No. A newer build for SM-P600 is available: P600UEUDQF1. Install it instead of P600XXSDRH5 unless you need this exact version. The previous build was P600XXSDQC2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.389 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Note 10.1 2014 Edition must be on bootloader binary S (28) or lower.

    This build uses bootloader binary S (28). It can be flashed on a Samsung Galaxy Note 10.1 2014 Edition running binary S (28) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 13 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Note 10.1 2014 Edition

    No changelog details available.
    Model firmware by region