SM-T211 2 countries Android 4.1.2 (Jelly Bean)

Samsung Galaxy Tab3 7.0 T211XXAMJ5 Firmware

Name: Samsung Galaxy Tab3 7.0 (SM-T211)
Brand: Samsung
Availability: InStock

Samsung Galaxy Tab3 7.0 T211XXAMJ5 is an Android 4.1.2 (Jelly Bean) firmware for Greece (EUR), Spain (PHE). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T211XXAMGI https://samfirm.shop/build/T211XXAMGI: Android updated from Jelly(Android Bean) to Android 4.1.2 (Jelly Bean). A newer build for SM-T211 is available: T211XXBPA2 https://samfirm.shop/build/T211XXBPA2.

8.9/10 (471)8,790 times

Android 4.1.2 (Jelly Bean)

OS Version

2013-10-15

Build Date

n/a

Security patch

Countries

CSC codes

X (33)

Bootloader binary

Bootloader binary X (33). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: T211XXAMGH

Model	Region	CSC Version	Release date	Size	File name	Download
SM-T211	EUR Greece	T211OXXAMJ1	2013-12-05	826.577 MiB	SM-T211_EUR_1_20150305160820_b166xlmf40_fac.zip
SM-T211	PHE Spain	T211OXXAMJ1	2013-11-29	844.14 MiB	SM-T211_PHE_1_20150204171230_p78mub42en_fac.zip

Device specifications

Launched withAndroid
Display diagonal17.8 cm (7")
Display resolution1024 x 600 pixels
Processor frequency1.2 GHz
Rear camera resolution3 MP
Rear camera typeSingle camera
Front camera resolution1.3 MP
Wi-Fi standardWi-Fi 4 (802.11n)
Weight304 g

How to flash T211XXAMJ5

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

T211XXAMJ5 has bootloader binary X (33). Your device must run binary X (33) or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

T211XXAMJ5 is Android 4.1.2 (Jelly Bean) firmware for Samsung Galaxy Tab3 7.0, released for Greece (EUR), Spain (PHE). Samsung built it on 2013-10-15.

No. A newer build for SM-T211 is available: T211XXBPA2. Install it instead of T211XXAMJ5 unless you need this exact version. The previous build was T211XXAMGI.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab3 7.0 must be on bootloader binary X (33) or lower.

This build uses bootloader binary X (33). It can be flashed on a Samsung Galaxy Tab3 7.0 running binary X (33) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 27 other builds of this model use the same binary, so you can switch between them in both directions.