Samsung Galaxy Tab3 7.0 T211XXBNI2
SM-T211 11 countries Android 4.4.2 (KitKat)

Samsung Galaxy Tab3 7.0 T211XXBNI2 Firmware

Samsung Galaxy Tab3 7.0 T211XXBNI2 is an Android 4.4.2 (KitKat) firmware for 11 countries, 13 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T211XXBNI1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T211 is available: T211XXBPA2.

Download firmware
9.2/10 (478)57,065 times
Android 4.4.2 (KitKat)
OS Version
2014-09-08
First release
other regions until 2015-06-16
11
Countries
13
CSC codes
X (33)
Bootloader binary

Bootloader binary X (33). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    2
    MODEM/CP Version: T211XXBNI2
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-T211
    AFG Afghanistan
    BTC Libya
    EGY Egypt
    KSA, WTL Saudi Arabia
    +7 more countries
    MID Iraq
    MRT Mauritania
    MWD Morocco
    PAK Pakistan
    TMC Algeria
    XFE South Africa
    XSG United Arab Emirates
    		T211OJVBNI2 2015-06-16 2014-10-17 871.483 MiB
    SM-T211_1_20150914211201_lsft287cvf_fac.zip
    		Download
    SM-T211
    SAC Algeria
    		T211OJVBNI2 2014-09-08 2015-06-16 — — Download

    No matching downloads

    How to flash T211XXBNI2

    • T211XXBNI2 has bootloader binary X (33). Your device must run binary X (33) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of T211XXBNI2 by region

    First release
    October 17, 2014
    Last region
    June 16, 2015
    Duration
    243 days
    Regions
    12
    1. Day 1 · · 1 region
      Saudi ArabiaKSA
    2. Day 4 · · 1 region
      United Arab EmiratesXSG
    3. Day 21 · · 1 region
      EgyptEGY
    4. Day 148 · · 3 regions
      MauritaniaMRTMoroccoMWDPakistanPAK
    5. Day 153 · · 2 regions
      AfghanistanAFGSouth AfricaXFE
    6. Day 166 · · 1 region
      IraqMID
    7. Day 243 · · 3 regions
      AlgeriaSACTMCSaudi ArabiaWTL

    Device specifications

    • Launched withAndroid
    • Display diagonal17.8 cm (7")
    • Display resolution1024 x 600 pixels
    • Processor frequency1.2 GHz
    • Rear camera resolution3 MP
    • Rear camera typeSingle camera
    • Front camera resolution1.3 MP
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight304 g

    Frequently Asked Questions

    T211XXBNI2 is Android 4.4.2 (KitKat) firmware for Samsung Galaxy Tab3 7.0, released for 11 countries, 13 CSC codes. Samsung built it on 2014-09-08.

    No. A newer build for SM-T211 is available: T211XXBPA2. Install it instead of T211XXBNI2 unless you need this exact version. The previous build was T211XXBNI1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 871.483 MiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab3 7.0 must be on bootloader binary X (33) or lower.

    This build uses bootloader binary X (33). It can be flashed on a Samsung Galaxy Tab3 7.0 running binary X (33) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 27 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab3 7.0

    No changelog details available.
    Model firmware by region