Samsung Galaxy Tab3 7.0 T211XXBNH1
SM-T211 9 countries Android 4.4.2 (KitKat)

Samsung Galaxy Tab3 7.0 T211XXBNH1 Firmware

Samsung Galaxy Tab3 7.0 T211XXBNH1 is an Android 4.4.2 (KitKat) firmware for 9 countries, 10 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T211XXBND4: Android updated from Android 4.4.2 (Jelly) to Android 4.4.2 (KitKat). A newer build for SM-T211 is available: T211XXBPA2.

Download firmware
9.4/10 (483)44,279 times
Android 4.4.2 (KitKat)
OS Version
2014-08-04
First release
other regions until 2014-09-16
9
Countries
10
CSC codes
X (33)
Bootloader binary

Bootloader binary X (33). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    5
    MODEM/CP Version: T211XXBNH1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-T211
    AMN Spain
    		T211AMNBNG2 2014-09-16 2014-09-16 808.224 MiB
    SM-T211_AMN_1_20140916161210_pqhcj2dnjl_fac.zip
    		Download
    SM-T211
    INS, INU India
    		T211ODDBNH1 2014-08-04 2014-08-28 830.971 MiB
    SM-T211_1_20150615160600_497bxmnukw_fac.zip
    		Download
    SM-T211
    ORL Romania
    		T211ORLBNG2 — — — — Download
    SM-T211
    THL Thailand
    XME Malaysia
    XSE Indonesia
    XTC Philippines
    +1 more country
    XXV Vietnam
    		T211OLBBNH1 2014-08-25 2014-08-25 845.546 MiB
    SM-T211_1_20151105123413_6oncizgkgw_fac.zip
    		Download
    SM-T211
    XSP Singapore
    		T211OLBBNH1 2014-08-25 2014-08-25 845.545 MiB
    SM-T211_XSP_1_20140826112240_yocr7jrzn6_fac.zip
    		Download

    No matching downloads

    How to flash T211XXBNH1

    • T211XXBNH1 has bootloader binary X (33). Your device must run binary X (33) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of T211XXBNH1 by region

    First release
    August 25, 2014
    Last region
    September 16, 2014
    Duration
    23 days
    Regions
    9
    1. Day 1 · · 6 regions
      IndonesiaXSEMalaysiaXMEPhilippinesXTCSingaporeXSPThailandTHLVietnamXXV
    2. Day 4 · · 2 regions
      IndiaINSINU
    3. Day 23 · · 1 region
      SpainAMN

    Device specifications

    • Launched withAndroid
    • Display diagonal17.8 cm (7")
    • Display resolution1024 x 600 pixels
    • Processor frequency1.2 GHz
    • Rear camera resolution3 MP
    • Rear camera typeSingle camera
    • Front camera resolution1.3 MP
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight304 g

    Frequently Asked Questions

    T211XXBNH1 is Android 4.4.2 (KitKat) firmware for Samsung Galaxy Tab3 7.0, released for 9 countries, 10 CSC codes. Samsung built it on 2014-08-04.

    No. A newer build for SM-T211 is available: T211XXBPA2. Install it instead of T211XXBNH1 unless you need this exact version. The previous build was T211XXBND4.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab3 7.0 must be on bootloader binary X (33) or lower.

    This build uses bootloader binary X (33). It can be flashed on a Samsung Galaxy Tab3 7.0 running binary X (33) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 27 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab3 7.0

    No changelog details available.
    Model firmware by region