Samsung Galaxy Tab A 7.0 T285XXU0APCK
SM-T285 11 countries Android 5.1.1 (Lollipop)

Samsung Galaxy Tab A 7.0 T285XXU0APCK Firmware

Samsung Galaxy Tab A 7.0 T285XXU0APCK is an Android 5.1.1 (Lollipop) firmware for 11 countries, 11 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T285XXU0APCB, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T285 is available: T285XXU0ATH1.

Download firmware
9.2/10 (455)47,288 times
Android 5.1.1 (Lollipop)
OS Version
2016-03-23
Build Date
n/a
Security patch
11
Countries
11
CSC codes
0
Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    6
    MODEM/CP Version: T285XXU0APCK
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-T285
    AUT Switzerland
    		T2850APC2 — — —
    SM-T285
    BTU United Kingdom
    		T2850APD1 — — —
    SM-T285
    EUR Greece
    ROM Romania
    SEE Serbia
    XEF France
    +2 more countries
    XEZ Czechia
    XSK Slovakia
    		T285OXX0APC4, T285OXX0APD2 2016-04-14 1.029 GiB
    SM-T285_1_20181212150134_8r4ggq704i_fac.zip
    SM-T285
    PHE Spain
    		T2850APC3 — — —
    SM-T285
    XEH Hungary
    		T2850APC2 — — —
    SM-T285
    XEO Poland
    		T285OXA0APCK 2016-03-31 1.025 GiB
    SM-T285_1_20181126110727_wkbwjud6pt_fac.zip

    No matching downloads

    How to flash T285XXU0APCK

    • T285XXU0APCK has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of T285XXU0APCK by region

    First release
    March 31, 2016
    Last region
    May 12, 2016
    Duration
    43 days
    Regions
    7
    1. Day 1 · · 1 region
      PolandXEO
    2. Day 15 · · 1 region
      RomaniaROM
    3. Day 16 · · 1 region
      GreeceEUR
    4. Day 19 · · 1 region
      SerbiaSEE
    5. Day 24 · · 1 region
      CzechiaXEZ
    6. Day 29 · · 1 region
      FranceXEF
    7. Day 43 · · 1 region
      SlovakiaXSK

    Device specifications

    • Launched withAndroid
    • Display diagonal17.8 cm (7")
    • Display resolution1280 x 720 pixels
    • Processor frequency1.5 GHz
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Front camera resolution2 MP
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight289 g

    Frequently Asked Questions

    T285XXU0APCK is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy Tab A 7.0, released for 11 countries, 11 CSC codes. Samsung built it on 2016-03-23.

    No. A newer build for SM-T285 is available: T285XXU0ATH1. Install it instead of T285XXU0APCK unless you need this exact version. The previous build was T285XXU0APCB.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab A 7.0 must be on bootloader binary 0 or lower.

    This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy Tab A 7.0 running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 44 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab A 7.0

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    Model firmware by region