Samsung Galaxy Tab E 8.0 T377WVLS3BTJ1
SM-T377W 1 country Android 7.1.1 (Nougat)

Samsung Galaxy Tab E 8.0 T377WVLS3BTJ1 Firmware

Samsung Galaxy Tab E 8.0 T377WVLS3BTJ1 is an Android 7.1.1 (Nougat) firmware for Canada (BMC, BWA, FMC, KDO, RWC, TLS, VMC, XAC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T377WVLU3BRG4, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. This is the newest build for SM-T377W.

Download firmware
9.2/10 (459)36,342 times
Android 7.1.1 (Nougat)
OS Version
2020-11-10
Build Date
2018-06-01
Security patch
1
Countries
8
CSC codes
3
Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: T377WVLS3BTJ1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-T377W
    BMC, BWA, FMC, KDO, RWC, TLS, VMC, XAC Canada
    		T377WOYA3BTJ1 2020-11-10 1.71 GiB
    SM-T377W_1_20201110145834_csni3t75h3_fac.zip
    MD5:cb832b270f506da855cf9f7f70768ce1
    SHA1:fc93a5acb4eefbb2aea8731aef670bcd56b403cc
    		Download

    No matching downloads

    How to flash T377WVLS3BTJ1

    • T377WVLS3BTJ1 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in T377WVLS3BTJ1

    · The security of your device has been improved.

    Rollout of T377WVLS3BTJ1 by region

    Samsung released this build in all regions (8) on the same day, November 10, 2020.

    Device specifications

    • Launched withAndroid 6.0
    • Display diagonal20.3 cm (8")
    • Display resolution1200 x 800 pixels
    • Processor frequency1.3 GHz
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Front camera resolution2 MP
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight360 g

    Frequently Asked Questions

    T377WVLS3BTJ1 is Android 7.1.1 (Nougat) firmware for Samsung Galaxy Tab E 8.0, released for Canada (BMC, BWA, FMC, KDO, RWC, TLS, VMC, XAC). It includes the 2018-06-01 security patch. Samsung built it on 2020-11-10.

    Yes. T377WVLS3BTJ1 is the newest build for SM-T377W on SamFirm. The previous build was T377WVLU3BRG4.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.71 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab E 8.0 must be on bootloader binary 3 or lower.

    This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy Tab E 8.0 running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab E 8.0

    · The security of your device has been improved.

    No changelog details available.
    Model firmware by region