Samsung Galaxy Tab E 8.0 T377WVLU1APD6
SM-T377W 1 country Android 6.0.1 (Marshmallow)

Samsung Galaxy Tab E 8.0 T377WVLU1APD6 Firmware

Samsung Galaxy Tab E 8.0 T377WVLU1APD6 is an Android 6.0.1 (Marshmallow) firmware for Canada (GLW, VTR). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. A newer build for SM-T377W is available: T377WVLS3BTJ1.

Download firmware
8.9/10 (480)8,572 times
Android 6.0.1 (Marshmallow)
OS Version
2016-04-22
Build Date
1
Countries
2
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Tab E 8.0 use bootloader binary 3 (latest: T377WVLS3BTJ1). If your device already runs binary 3, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: T377WVLU1APD6
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-T377W
    GLW, VTR Canada
    		T377WOYA1APD6 2016-06-28 1.357 GiB
    SM-T377W_1_20160628133453_lwi2gzpgj9_fac.zip
    		Download

    No matching downloads

    How to flash T377WVLU1APD6

    • T377WVLU1APD6 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of T377WVLU1APD6 by region

    Samsung released this build in all regions (2) on the same day, June 28, 2016.

    Device specifications

    • Launched withAndroid 6.0
    • Display diagonal20.3 cm (8")
    • Display resolution1200 x 800 pixels
    • Processor frequency1.3 GHz
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Front camera resolution2 MP
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight360 g

    Frequently Asked Questions

    T377WVLU1APD6 is Android 6.0.1 (Marshmallow) firmware for Samsung Galaxy Tab E 8.0, released for Canada (GLW, VTR). Samsung built it on 2016-04-22.

    No. A newer build for SM-T377W is available: T377WVLS3BTJ1. Install it instead of T377WVLU1APD6 unless you need this exact version.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.357 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab E 8.0 must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Tab E 8.0 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary 1.

    Other builds and changelog for Samsung Galaxy Tab E 8.0

    · The security of your device has been improved.

    No changelog details available.
    Model firmware by region