Samsung Galaxy Tab E 8.0 T377WVLU3BRG4
SM-T377W 1 country Android 7.1.1 (Nougat)

Samsung Galaxy Tab E 8.0 T377WVLU3BRG4 Firmware

Samsung Galaxy Tab E 8.0 T377WVLU3BRG4 is an Android 7.1.1 (Nougat) firmware for Canada (BMC, BWA, FMC, KDO, RWC, TLS, VMC, XAC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T377WVLU2BQI6: bootloader binary raised from 2 to 3, so after installing it there is no way back to older builds. A newer build for SM-T377W is available: T377WVLS3BTJ1.

Download firmware
8.7/10 (480)34,950 times
Android 7.1.1 (Nougat)
OS Version
2018-07-10
Build Date
1
Countries
8
CSC codes
3
Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: T377WVLU3BRG4
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-T377W
    BMC, BWA, FMC, KDO, RWC, TLS, VMC, XAC Canada
    		T377WOYA3BRG4 2018-07-30 1.71 GiB
    SM-T377W_1_20201110145834_csni3t75h3_fac.zip
    MD5:cb832b270f506da855cf9f7f70768ce1
    SHA1:fc93a5acb4eefbb2aea8731aef670bcd56b403cc
    		Download

    No matching downloads

    How to flash T377WVLU3BRG4

    • T377WVLU3BRG4 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of T377WVLU3BRG4 by region

    First release
    July 30, 2018
    Last region
    July 31, 2018
    Duration
    2 days
    Regions
    8
    1. Day 1 · · 4 regions
      CanadaFMCKDORWCTLS
    2. Day 2 · · 4 regions
      CanadaBMCBWAVMCXAC

    Device specifications

    • Launched withAndroid 6.0
    • Display diagonal20.3 cm (8")
    • Display resolution1200 x 800 pixels
    • Processor frequency1.3 GHz
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Front camera resolution2 MP
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight360 g

    Frequently Asked Questions

    T377WVLU3BRG4 is Android 7.1.1 (Nougat) firmware for Samsung Galaxy Tab E 8.0, released for Canada (BMC, BWA, FMC, KDO, RWC, TLS, VMC, XAC). Samsung built it on 2018-07-10.

    No. A newer build for SM-T377W is available: T377WVLS3BTJ1. Install it instead of T377WVLU3BRG4 unless you need this exact version. The previous build was T377WVLU2BQI6.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.71 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab E 8.0 must be on bootloader binary 3 or lower.

    This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy Tab E 8.0 running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab E 8.0

    · The security of your device has been improved.

    No changelog details available.
    Model firmware by region