Samsung Galaxy XCover 4s G398FNXXSCCUG7
SM-G398FN 6 countries Android 11

Samsung Galaxy XCover 4s G398FNXXSCCUG7 Firmware

Samsung Galaxy XCover 4s G398FNXXSCCUG7 is an Android 11 firmware for 6 countries, 9 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G398FNXXSCCUG6, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G398FN is available: G398FNXXSJCWF2.

Download firmware
9.3/10 (492)40,654 times
Android 11
OS Version
2021-08-24
Build Date
2021-08-01
Security patch
6
Countries
9
CSC codes
C (12)
Bootloader binary

Bootloader binary C (12). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy XCover 4s use bootloader binary J (19) (latest: G398FNXXSJCWF2). If your device already runs binary J (19), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: G398FNXXUCCUG1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-G398FN
    NZC, TNZ, VNZ, XNZ New Zealand
    THL Thailand
    XME Malaysia
    XSA Australia
    +2 more countries
    XSP Singapore
    XXV Vietnam
    		G398FNOLMCCUG5 2021-08-24 4.006 GiB
    SM-G398FN_2_20210816154946_xo03s81g7m_fac.zip
    		Download

    No matching downloads

    How to flash G398FNXXSCCUG7

    • G398FNXXSCCUG7 has bootloader binary C (12). Your device must run binary C (12) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in G398FNXXSCCUG7

    • The security of your device has been improved.

    Rollout of G398FNXXSCCUG7 by region

    Samsung released this build in all regions (9) on the same day, August 24, 2021.

    Device specifications

    • Launched withAndroid 9.0
    • Display diagonal12.7 cm (5")
    • Display resolution720 x 1280 pixels
    • Processor frequency1.6 GHz
    • RAM3 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsDual SIM
    • Battery capacity2800 mAh

    Frequently Asked Questions

    G398FNXXSCCUG7 is Android 11 firmware for Samsung Galaxy XCover 4s, released for 6 countries, 9 CSC codes. It includes the 2021-08-01 security patch. Samsung built it on 2021-08-24.

    No. A newer build for SM-G398FN is available: G398FNXXSJCWF2. Install it instead of G398FNXXSCCUG7 unless you need this exact version. The previous build was G398FNXXSCCUG6.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 4.006 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy XCover 4s must be on bootloader binary C (12) or lower.

    This build uses bootloader binary C (12). It can be flashed on a Samsung Galaxy XCover 4s running binary C (12) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 9 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy XCover 4s

    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    Show 12 older builds

    • The security of your device has been improved.

    Model firmware by region