Samsung Galaxy XCover 4s G398FNXXU4ATBA
SM-G398FN 5 countries Android 9 (Pie)

Samsung Galaxy XCover 4s G398FNXXU4ATBA Firmware

Samsung Galaxy XCover 4s G398FNXXU4ATBA is an Android 9 (Pie) firmware for 5 countries, 6 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G398FNXXS4ATB5, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G398FN is available: G398FNXXSJCWF2.

Download firmware
9.4/10 (460)26,293 times
Android 9 (Pie)
OS Version
2020-02-24
Build Date
2020-03-01
Security patch
5
Countries
6
CSC codes
4
Bootloader binary

Bootloader binary 4. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy XCover 4s use bootloader binary J (19) (latest: G398FNXXSJCWF2). If your device already runs binary J (19), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: G398FNXXU4ATBA
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-G398FN
    AMO Spain
    		G398FNOGC4ATB1 2020-04-01 — — Download
    SM-G398FN
    FTM France
    		G398FNOGC4ATB1 2020-04-01 — — Download
    SM-G398FN
    NEE Nordic Europe
    		G398FNOXM4ATBA 2020-03-16 — — Download
    SM-G398FN
    OPV Poland
    		G398FNOGC4ATB1 2020-04-01 — — Download
    SM-G398FN
    ORS Slovakia
    		G398FNOGC4ATB1 2020-04-01 — — Download
    SM-G398FN
    XEF France
    		G398FNOXM4ATBA 2020-03-17 — — Download

    No matching downloads

    How to flash G398FNXXU4ATBA

    • G398FNXXU4ATBA has bootloader binary 4. Your device must run binary 4 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in G398FNXXU4ATBA

    • The stability of Camera has been improved.
    • The security of your device has been improved.

    Rollout of G398FNXXU4ATBA by region

    First release
    March 16, 2020
    Last region
    April 1, 2020
    Duration
    17 days
    Regions
    6
    1. Day 1 · · 1 region
      Nordic EuropeNEE
    2. Day 2 · · 1 region
      FranceXEF
    3. Day 17 · · 4 regions
      FranceFTMPolandOPVSlovakiaORSSpainAMO

    Device specifications

    • Launched withAndroid 9.0
    • Display diagonal12.7 cm (5")
    • Display resolution720 x 1280 pixels
    • Processor frequency1.6 GHz
    • RAM3 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsDual SIM
    • Battery capacity2800 mAh

    Frequently Asked Questions

    G398FNXXU4ATBA is Android 9 (Pie) firmware for Samsung Galaxy XCover 4s, released for 5 countries, 6 CSC codes. It includes the 2020-03-01 security patch. Samsung built it on 2020-02-24.

    No. A newer build for SM-G398FN is available: G398FNXXSJCWF2. Install it instead of G398FNXXU4ATBA unless you need this exact version. The previous build was G398FNXXS4ATB5.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy XCover 4s must be on bootloader binary 4 or lower.

    This build uses bootloader binary 4. It can be flashed on a Samsung Galaxy XCover 4s running binary 4 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 5 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy XCover 4s

    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    Show 12 older builds

    • The security of your device has been improved.

    Model firmware by region