Samsung Galaxy Note4 N910CXXS2DQBC
SM-N910C 2 countries Android 6.0.1 (Marshmallow)

Samsung Galaxy Note4 N910CXXS2DQBC Firmware

First release:

Samsung Galaxy Note4 N910CXXS2DQBC is an Android 6.0.1 (Marshmallow) firmware for Costa Rica (ICE), Uruguay (CTU). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build N910CXXS2DQBB: Android updated from Android 6.0.1 (Lollipop) to Android 6.0.1 (Marshmallow). A newer build for SM-N910C is available: N910CXXU2DSC1.

Download firmware
8.7 (38)8,704 times
Android 6.0.1 (Marshmallow)
OS Version
2017-02-15
First release
other regions until 2017-03-10
2
Countries
2
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-N910C
    CTU Uruguay
    		N910CUWA2DPH1N910CXXS2DQBC 2017-02-15 — — — Download
    SM-N910C
    ICE Costa Rica
    		N910CICE2DQB1N910CXXU1DPE4 2017-03-10 2017-03-13 1.986 GiB
    SM-N910C_1_20170310114626_tmd645mrt9_fac.zip
    		Download
    SM-N910C
    ICE Costa Rica
    		N910C2DQB1N910CXXS2DQBC 2017-02-15 — — — Download

    No matching downloads

    How to flash N910CXXS2DQBC

    • N910CXXS2DQBC has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of N910CXXS2DQBC by region

    Samsung released this build in all regions (1) on the same day, March 13, 2017.

    Device specifications

    • Display diagonal14.5 cm (5.7")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • Processor frequency1.9 GHz
    • RAM3 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity3220 mAh
    • Weight176 g

    Frequently Asked Questions

    N910CXXS2DQBC is Android 6.0.1 (Marshmallow) firmware for Samsung Galaxy Note4, released for Costa Rica (ICE), Uruguay (CTU). Samsung built it on 2017-02-15.

    No. A newer build for SM-N910C is available: N910CXXU2DSC1. Install it instead of N910CXXS2DQBC unless you need this exact version. The previous build was N910CXXS2DQBB.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.986 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Note4 must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy Note4 running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 154 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Note4

    No changelog details available.

    ·Battery usage optimisation
    ·Improved performance with efficient memory management
    ·Security Enhancements
    ·Improved the stability
    ·After updating, you will not be able to downgrade to the old software because of updates to the security policy.

    No changelog details available.
    Model firmware by region

    New firmware for other devices

    All latest builds