Samsung GT-S5300 S5300DXLK1 Firmware
Samsung GT-S5300 S5300DXLK1 is an Android 2.3.6 (Gingerbread) firmware for Singapore (XSP). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. A newer build for GT-S5300 is available: S5300XXMD1 https://samfirm.shop/build/S5300XXMD1.
Android 2.3.6 (Gingerbread)
OS Version
2012-11-21
Build Date
1
Countries
1
CSC codes
D (13)
Bootloader binary
Bootloader binary D (13). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.
Newer builds of Samsung GT-S5300 use bootloader binary X (33) (latest: S5300XXMD1 https://samfirm.shop/build/S5300XXMD1). If your device already runs binary X (33), this build cannot be flashed.
All regional downloads
Pick your region (CSC) to download the matching firmware package.
Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
MODEM/CP Version: S5300DXLK1
| Model | Region | CSC Version | Release date | Size | File name | Download |
|---|---|---|---|---|---|---|
| GT-S5300 |
XSP Singapore | S5300OLBLK2 | 2012-12-05 | 162.671 MiB | GT-S5300_XSP_1_20130902120720_52iz6d6x4t_fac.zip | Download |
No matching downloads
How to flash S5300DXLK1
- S5300DXLK1 has bootloader binary D (13). Your device must run binary D (13) or lower: it is the 5th character from the end of your current build number.
- CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
- HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
- The Download Mode key combo depends on the model: see all combos.
Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.
Device specifications
- Launched withAndroid 2.3
- Display diagonal7.11 cm (2.8")
- Display resolution320 x 240 pixels
- Display typeTFT
- Processor frequency0.832 GHz
- Processor familyBroadcom
- Rear camera resolution2 MP
- Rear camera typeSingle camera
- SIM cardsSingle SIM
- Battery capacity1200 mAh
- Weight95.5 g
Frequently Asked Questions
S5300DXLK1 is Android 2.3.6 (Gingerbread) firmware for Samsung GT-S5300, released for Singapore (XSP). Samsung built it on 2012-11-21.
No. A newer build for GT-S5300 is available: S5300XXMD1. Install it instead of S5300DXLK1 unless you need this exact version.
Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 162.671 MiB; keep about twice that free on the computer to unzip it. The Samsung GT-S5300 must be on bootloader binary D (13) or lower.
This build uses bootloader binary D (13). It can be flashed on a Samsung GT-S5300 running binary D (13) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary D (13).
Other builds and changelog for Samsung GT-S5300
No changelog details available.
- S5300XXMD1Apr 4, 2013
- S5300XXLJ4Nov 5, 2012
- S5300XXLG2Aug 8, 2013
- S5300XXLF4Jul 2, 2012
- S5300DXLK1Nov 21, 2012