Samsung GT-S5300 S5300XXLF4
GT-S5300 1 country Android 2.3.6

Samsung GT-S5300 S5300XXLF4 Firmware

Samsung GT-S5300 S5300XXLF4 is an Android 2.3.6 firmware for Turkey (TUR). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build S5300DXLK1: Android updated from Android 2.3.6 (Gingerbread) to Android 2.3.6; bootloader binary raised from D (13) to X (33), so after installing it there is no way back to older builds. A newer build for GT-S5300 is available: S5300XXMD1.

Download firmware
9.4/10 (137)881 times
Android 2.3.6
OS Version
2012-07-02
Build Date
1
Countries
1
CSC codes
X (33)
Bootloader binary

Bootloader binary X (33). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: S5300XXLF4
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    GT-S5300
    TUR Turkey
    		S5300OJVLE5 2012-07-16 162.324 MiB
    GT-S5300_TUR_1_20140825154710_jp5btequc9_fac.zip
    		Download

    No matching downloads

    How to flash S5300XXLF4

    • S5300XXLF4 has bootloader binary X (33). Your device must run binary X (33) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 2.3
    • Display diagonal7.11 cm (2.8")
    • Display resolution320 x 240 pixels
    • Display typeTFT
    • Processor frequency0.832 GHz
    • Processor familyBroadcom
    • Rear camera resolution2 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity1200 mAh
    • Weight95.5 g

    Frequently Asked Questions

    S5300XXLF4 is Android 2.3.6 firmware for Samsung GT-S5300, released for Turkey (TUR). Samsung built it on 2012-07-02.

    No. A newer build for GT-S5300 is available: S5300XXMD1. Install it instead of S5300XXLF4 unless you need this exact version. The previous build was S5300DXLK1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 162.324 MiB; keep about twice that free on the computer to unzip it. The Samsung GT-S5300 must be on bootloader binary X (33) or lower.

    This build uses bootloader binary X (33). It can be flashed on a Samsung GT-S5300 running binary X (33) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 3 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung GT-S5300

    No changelog details available.
    Model firmware by region