Samsung GT-S5300 S5300XXMD1 Firmware
Samsung GT-S5300 S5300XXMD1 is an Android 2.3.6 (Gingerbread) firmware for Hungary (XEH), Switzerland (AUT). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build S5300XXLJ4 https://samfirm.shop/build/S5300XXLJ4, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. This is the newest build for GT-S5300.
Android 2.3.6 (Gingerbread)
OS Version
2013-04-04
Build Date
2
Countries
2
CSC codes
X (33)
Bootloader binary
Bootloader binary X (33). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.
All regional downloads
Pick your region (CSC) to download the matching firmware package.
Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
MODEM/CP Version: S5300XXMD1
| Model | Region | CSC Version | Build Date | Release date | Size | File name | Download |
|---|---|---|---|---|---|---|---|
| GT-S5300 |
AUT Switzerland | S5300OXXMD1 | 2013-04-04 | 2013-04-17 | 166.594 MiB | GT-S5300_AUT_1_20141004135310_s967sstp6j_fac.zip | Download |
| GT-S5300 |
XEH Hungary | S5300OXXMD1 | 2013-04-04 | 2013-04-23 | 166.431 MiB | GT-S5300_XEH_1_20130604144505_ervxgpumt5_fac.zip | Download |
No matching downloads
How to flash S5300XXMD1
- S5300XXMD1 has bootloader binary X (33). Your device must run binary X (33) or lower: it is the 5th character from the end of your current build number.
- CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
- HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
- The Download Mode key combo depends on the model: see all combos.
Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.
Rollout of S5300XXMD1 by region
- First release
- April 17, 2013
- Last region
- April 23, 2013
- Duration
- 7 days
- Regions
- 2
- Day 1 · · 1 regionSwitzerlandAUT
- Day 7 · · 1 regionHungaryXEH
Device specifications
- Launched withAndroid 2.3
- Display diagonal7.11 cm (2.8")
- Display resolution320 x 240 pixels
- Display typeTFT
- Processor frequency0.832 GHz
- Processor familyBroadcom
- Rear camera resolution2 MP
- Rear camera typeSingle camera
- SIM cardsSingle SIM
- Battery capacity1200 mAh
- Weight95.5 g
Frequently Asked Questions
S5300XXMD1 is Android 2.3.6 (Gingerbread) firmware for Samsung GT-S5300, released for Hungary (XEH), Switzerland (AUT). Samsung built it on 2013-04-04.
Yes. S5300XXMD1 is the newest build for GT-S5300 on SamFirm. The previous build was S5300XXLJ4.
Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung GT-S5300 must be on bootloader binary X (33) or lower.
This build uses bootloader binary X (33). It can be flashed on a Samsung GT-S5300 running binary X (33) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 3 other builds of this model use the same binary, so you can switch between them in both directions.
Other builds and changelog for Samsung GT-S5300
No changelog details available.
- S5300XXMD1Apr 4, 2013
- S5300XXLJ4Nov 5, 2012
- S5300XXLG2Aug 8, 2013
- S5300XXLF4Jul 2, 2012
- S5300DXLK1Nov 21, 2012