Samsung Galaxy Ace S5830XWKPU Firmware
Samsung Galaxy Ace S5830XWKPU is an Android 2.3.6 (Gingerbread) firmware for Ireland (TSI), Romania (CNX). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build S5830XWKPJ https://samfirm.shop/build/S5830XWKPJ: Android updated from Android 2.3.3 (Gingerbread) to Android 2.3.6 (Gingerbread). A newer build for GT-S5830 is available: S5830ZSKPD https://samfirm.shop/build/S5830ZSKPD.
Android 2.3.6 (Gingerbread)
OS Version
2011-08-13
First release
other regions until 2013-05-29
2
Countries
2
CSC codes
X (33)
Bootloader binary
Bootloader binary X (33). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.
Newer builds of Samsung Galaxy Ace use bootloader binary Z (35) (latest: S5830ZSKPD https://samfirm.shop/build/S5830ZSKPD). If your device already runs binary Z (35), this build cannot be flashed.
All regional downloads
Pick your region (CSC) to download the matching firmware package.
Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
How to flash S5830XWKPU
- S5830XWKPU has bootloader binary X (33). Your device must run binary X (33) or lower: it is the 5th character from the end of your current build number.
- CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
- HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
- The Download Mode key combo depends on the model: see all combos.
Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.
Rollout of S5830XWKPU by region
Samsung released this build in all regions (1) on the same day, November 3, 2011.
Device specifications
- Launched withAndroid 2.2
- Display diagonal8.89 cm (3.5")
- Display resolution320 x 480 pixels
- Processor frequency0.8 GHz
- Rear camera resolution5 MP
- Rear camera typeSingle camera
- SIM cardsSingle SIM
- Battery capacity1350 mAh
- Weight113 g
Frequently Asked Questions
S5830XWKPU is Android 2.3.6 (Gingerbread) firmware for Samsung Galaxy Ace, released for Ireland (TSI), Romania (CNX). Samsung built it on 2011-08-13.
No. A newer build for GT-S5830 is available: S5830ZSKPD. Install it instead of S5830XWKPU unless you need this exact version. The previous build was S5830XWKPJ.
Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 137.854 MiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Ace must be on bootloader binary X (33) or lower.
This build uses bootloader binary X (33). It can be flashed on a Samsung Galaxy Ace running binary X (33) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 11 other builds of this model use the same binary, so you can switch between them in both directions.
Other builds and changelog for Samsung Galaxy Ace
No changelog details available.
- S5830ZSKPDSep 9, 2011
- S5830ZCKPBSep 9, 2011
- S5830XXKPTMar 3, 2012
- S5830XWKTSOct 17, 2012
- S5830XWKTRAug 30, 2012
- S5830XWKTQJul 30, 2012
- S5830XWKT7Dec 6, 2011
- S5830XWKT6Dec 5, 2011
- S5830XWKS9Oct 15, 2011
- S5830XWKS3Oct 4, 2011
- S5830XWKR2Nov 3, 2011
- S5830XWKPYSep 7, 2011
- S5830XWKPUAug 13, 2011
- S5830XWKPJJun 22, 2011
- S5830WGLP2Oct 17, 2012
- S5830POKP4Sep 7, 2011
- S5830JPKS2Sep 23, 2013
- S5830JPKP9Aug 7, 2011
- S5830DXKT7Oct 13, 2012
- S5830DXKT6Jan 19, 2012