Samsung Galaxy Ace S5830XWKPY
GT-S5830 6 countries Android 2.3.6 (Gingerbread)

Samsung Galaxy Ace S5830XWKPY Firmware

Samsung Galaxy Ace S5830XWKPY is an Android 2.3.6 (Gingerbread) firmware for 6 countries, 7 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build S5830XWKPU: Android updated from Android 2.3.3 (Gingerbread) to Android 2.3.6 (Gingerbread). A newer build for GT-S5830 is available: S5830ZSKPD.

Download firmware
8.9/10 (31)30,465 times
Android 2.3.6 (Gingerbread)
OS Version
2011-09-07
First release
other regions until 2013-05-29
6
Countries
7
CSC codes
X (33)
Bootloader binary

Bootloader binary X (33). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Ace use bootloader binary Z (35) (latest: S5830ZSKPD). If your device already runs binary Z (35), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    GT-S5830
    BHT Bosnia & Herzegovina
    		S5830XWKP8S5830OXFKP5 2011-09-07 — — —
    GT-S5830
    MSR Serbia
    		S5830XWKP8S5830OXFKP5 2011-09-07 — — —
    GT-S5830
    PAN Hungary
    		S5830OXXKPAS5830XWKP8 2011-09-07 2011-10-12 137.213 MiB
    GT-S5830_PAN_1_20130528152428_wpf9f9psnp_fac.zip
    GT-S5830
    SEK Ukraine
    		S5830SEKKP6S5830XWKP8 2011-09-07 2011-10-28 — —
    GT-S5830
    TWO Croatia
    		S5830XWKP8S5830OXFKP5 2011-09-07 — — —
    GT-S5830
    XEH Hungary
    		S5830OXXKPAS5830XWKP8 2011-09-07 2011-10-27 137.213 MiB
    GT-S5830_XEH_1_20130528160324_4k4lb98v3i_fac.zip
    GT-S5830
    XEU United Kingdom
    		S5830XEUKP1S5830XWKPA 2013-05-29 2011-10-01 138.102 MiB
    GT-S5830_XEU_1_20130529160308_h0eaxg1er7_fac.zip
    GT-S5830
    XEU United Kingdom
    		S5830XWKPAS5830XEUKP1 2011-09-07 — — —

    No matching downloads

    How to flash S5830XWKPY

    • S5830XWKPY has bootloader binary X (33). Your device must run binary X (33) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of S5830XWKPY by region

    First release
    October 1, 2011
    Last region
    October 28, 2011
    Duration
    28 days
    Regions
    4
    1. Day 1 · · 1 region
      United KingdomXEU
    2. Day 12 · · 1 region
      HungaryPAN
    3. Day 27 · · 1 region
      HungaryXEH
    4. Day 28 · · 1 region
      UkraineSEK

    Device specifications

    • Launched withAndroid 2.2
    • Display diagonal8.89 cm (3.5")
    • Display resolution320 x 480 pixels
    • Processor frequency0.8 GHz
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity1350 mAh
    • Weight113 g

    Frequently Asked Questions

    S5830XWKPY is Android 2.3.6 (Gingerbread) firmware for Samsung Galaxy Ace, released for 6 countries, 7 CSC codes. Samsung built it on 2011-09-07.

    No. A newer build for GT-S5830 is available: S5830ZSKPD. Install it instead of S5830XWKPY unless you need this exact version. The previous build was S5830XWKPU.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Ace must be on bootloader binary X (33) or lower.

    This build uses bootloader binary X (33). It can be flashed on a Samsung Galaxy Ace running binary X (33) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 11 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Ace

    No changelog details available.
    Model firmware by region