SM-T211 2 countries Android 4.1.2 (Jelly Bean)

Samsung Galaxy Tab3 7.0 T211XXAMK2 Firmware

Name: Samsung Galaxy Tab3 7.0 (SM-T211)
Brand: Samsung
Availability: InStock

Samsung Galaxy Tab3 7.0 T211XXAMK2 is an Android 4.1.2 (Jelly Bean) firmware for Nepal (NPL), TML. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T211XXAMJ5 https://samfirm.shop/build/T211XXAMJ5: Android updated from Jelly(Android Bean) to Android 4.1.2 (Jelly Bean). A newer build for SM-T211 is available: T211XXBPA2 https://samfirm.shop/build/T211XXBPA2.

9.0/10 (471)8,665 times

Android 4.1.2 (Jelly Bean)

OS Version

2013-11-07

Build Date

n/a

Security patch

Countries

CSC codes

X (33)

Bootloader binary

Bootloader binary X (33). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: T211XXAMK2

Model	Region	CSC Version	Release date	Size	File name	Download
SM-T211	NPL Nepal	T211ODDAMK1	2013-11-26	825.956 MiB	SM-T211_NPL_1_20141212135330_4w7a2t87dc_fac.zip
SM-T211	TML	T211ODDAMK1	2013-11-26	—	—

Device specifications

Launched withAndroid
Display diagonal17.8 cm (7")
Display resolution1024 x 600 pixels
Processor frequency1.2 GHz
Rear camera resolution3 MP
Rear camera typeSingle camera
Front camera resolution1.3 MP
Wi-Fi standardWi-Fi 4 (802.11n)
Weight304 g

How to flash T211XXAMK2

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

T211XXAMK2 has bootloader binary X (33). Your device must run binary X (33) or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

T211XXAMK2 is Android 4.1.2 (Jelly Bean) firmware for Samsung Galaxy Tab3 7.0, released for Nepal (NPL), TML. Samsung built it on 2013-11-07.

No. A newer build for SM-T211 is available: T211XXBPA2. Install it instead of T211XXAMK2 unless you need this exact version. The previous build was T211XXAMJ5.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 825.956 MiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab3 7.0 must be on bootloader binary X (33) or lower.

This build uses bootloader binary X (33). It can be flashed on a Samsung Galaxy Tab3 7.0 running binary X (33) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 27 other builds of this model use the same binary, so you can switch between them in both directions.